In, DiBiBi, every product line goes through testing built around how it’s actually used outdoors. Here’s what we check before it ships.
Pergolas & Gazebos
Product Line Testing & Validation
Sheds
Materials
UV Resistance
Panels are checked for UV stabilizer performance to reduce fading and surface degradation under prolonged sun exposure.
Environmental
Weather Resistance
Units are evaluated against rain, humidity, and temperature swings to confirm the structure holds up across seasons.
Materials
Corrosion Resistance
Steel and metal components go through salt spray testing to verify coating durability against rust.
Build
Assembly Testing
Full units are test-assembled using standard hardware and instructions to confirm fit, tolerances, and build time before mass production.
Materials
Door Hinge Testing
Hinges are cycle-tested to confirm they hold up under repeated daily open/close use over time.
Logistics
Packaging Drop Test
Packaged units are drop-tested to simulate handling during freight and last-mile delivery, checking for shifting or damage.
Field
Outdoor Use Feedback
Units are placed in real outdoor conditions over time, with performance tracked and fed back into product updates.
Pergolas & Gazebos
Structural
Frame Strength
Frame components are load-tested to confirm structural integrity under normal and stress conditions.
Structural
Roof Load
Roof panels and supports are tested against static load to confirm they hold up under snow accumulation or added weight.
Environmental
Wind Resistance Evaluation
Structures are assessed for stability under wind loads typical of outdoor installation sites.
Materials
Surface Treatment
Coatings and finishes are checked for adhesion and wear resistance to confirm long-term surface protection.
Durability
Fastener Testing
Bolts, screws, and connectors are tested for load-bearing capacity and resistance to loosening over time.
Logistics
Packaging Drop Test
Packaging is evaluated to confirm frame components and panels arrive without bends, scratches, or breakage.
Greenhouses
Structural
Panel Durability
Panels are checked for UV stabilizer performance to reduce fading and surface degradation under prolonged sun exposure.
Structural
Frame Stability
Frames are checked for rigidity and resistance to warping under load and weather exposure.
Materials
UV Resistance
Panel materials are tested for UV stabilizer performance to maintain light transmission and reduce yellowing over time.
Function
Assembly Testing
Vent components are checked for smooth operation and airflow performance to support plant growth conditions.
Logistics
Packaging Drop Test
Packaged units are drop-tested to confirm panels and frame parts withstand handling during transit.
Build
Assembly Accuracy
Units are test-built to confirm panel and frame alignment matches spec, minimizing on-site assembly issues.
Certifications & Compliance
Third-party certified management systems, plus product and material compliance for the markets we ship to. CE applies to greenhouses and steel sheds; REACH and California Prop 65 apply to material used across product lines.
FAQ’s
Greenhouses and steel (metal) sheds are CE certified for the EU market. Plastic storage sheds do not require CE certification, so they are not covered by it.
Select materials used in greenhouses, steel sheds and plastic storage sheds pass EU REACH testing and US California Prop 65 testing, confirming they are free of restricted and harmful substances.
Yes. Our manufacture operates certified ISO 9001 (quality), ISO 14001 (environmental) and ISO 45001 (occupational health & safety) management systems
Every product design is validated with simulated wind-resistance and snow-load testing, alongside material tests such as salt spray and UV aging. All key design specifications are verified to ensure the product meets customer requirements.
Yes. Send us your product specifications, drawings or testing standards and our quality team will review them and recommend a suitable inspection or testing plan